Find The Needle splitter routes and split ratios
Use the $60 T Junction, Y and U pieces, eight named routes and a 5 to 95% split ratio to keep a Find The Needle belt network readable.
Splitter parts and route behaviour follow the launch changelog and patches V15.4 and V16.4 (November 2026). Splitter prices other than the T Junction are shown in game.
Which splitter should I use?
| Part | Price | Best for |
|---|---|---|
| T Junction | $60 | The first branch on any line; now the first splitter card |
| Y Splitter | In game | Branching in line with the belt |
| Y Joiner | In game | Merging two lines into one |
| Compact Splitter / Joiner | In game | Tight builds; opens with Wire and Cores |
| Smart Splitter | In game | Sorting by item type, with a Scrap door |
| Split Ratio card | In game | Sending 5–95% one way, in 5% steps |
Two facts that catch people out: old saves that already had splitters get the T Junction free on V15.4, and splitters and joiners can now hang in the air, so a branch does not need a floor.
What is a splitter route?
A named group of splitters that switches together. You can create up to eight named, coloured routes, put splitters into one, and then switch the whole route ON or OFF at once — from the ROUTES page in the build menu, or from any splitter that belongs to it.
Routes can also be set to flip together, so opening one closes another. That is the closest the game gets to a production schedule: instead of rebuilding a branch when an order changes, flip two routes.
When is a route better than a belt?
| Situation | Use a route | Why |
|---|---|---|
| Same line feeds shop and order truck | Two routes, one each | Flip supply without demolition |
| Scrap-heavy pile | A route to the Smelter | Open it when the splitter’s Scrap door fills |
| Testing a new product | A route to the test line | Switch it off when the experiment ends |
| Shed extension coming | A route across the future wall line | Reroute instead of rebuild |
Naming matters more than it sounds. “Route 3” tells you nothing at 1 a.m.; “panels-to-truck” does.
How does the split ratio work?
The Split Ratio card sends 5% to 95% of a line one way, and since V16.4 it moves in 5% steps rather than 10%. It is a proportion, not a queue, so it is the right tool for:
- Bleeding a small share of output to a Depot while most of it sells.
- Feeding a slow machine without starving the fast one behind it.
- Balancing two identical lines that share one supply.
Do not use a ratio to solve a capacity problem. If a scanner is the bottleneck, a ratio just spreads the queue (scanner routing).
How does the smart splitter sort?
Each door takes a kind of item, the splitter shows its door numbers while you look at it, and V15.4 fixed the case that mattered most: a scrap heap now leaves through the Scrap door instead of stopping the line. On V16.4 each door also shows its rule under the number, with the item’s picture, so you can read a sorting pattern without opening the panel.
A sorting pattern that works on a metal-heavy pile:
| Door | Item | Destination |
|---|---|---|
| 1 | Hay and bales | Main processing line |
| 2 | Iron and copper scrap | Smelter |
| 3 | Everything else | Depot or overflow belt |
The metal side is on scrap metal and the Smelter.
Where should splitters sit relative to a scanner?
After the scan gate, never before it. A split ahead of the gate creates a branch where packaged product reaches the stand unseen, and a sold needle goes back into the pile.
The rule, in one line: gate, then split, then sell. The reasoning is on scanner routing.
What else helps a big belt network?
- Belt meter shows how much is flowing, which turns “the line feels slow” into a number.
- Underground belts chain together, and belt poles work at any height — since V16.4 a belt pole can even stand over a belt, with the belt running between its legs.
- Belt hangers keep runs off the floor, so you can walk under them.
- Belt Gates go anywhere on a belt on V16.4, joints and bends included, and can sit closer together.
- Compact Joiners bolt straight onto another compact machine, and compact splitters and joiners label each way in while you place them.
- Colours from the Customizer make one route visually obvious in a crowded yard (day, night and lighting).
Belt costs and the power side are on conveyors and power; the parts themselves are listed in the machines index; the order that motivates a reroute is on delivery orders.
Related Articles
guides
Find The Needle blueprints and Dismantle Mode
Save a Find The Needle build on a Blueprint Designer pad, copy it anywhere, and use the Needle Hammer to take it down with the refund shown first.
guides
Find The Needle day, night and lighting
Nights are brighter since V14.1 and Options has a brightness slider, but lamps, flood lights and a Light Sensor still pay for themselves in Find The Needle.
guides
Find The Needle demo versus the full game
The free demo stops at V8 and has no metal, Depot, pipes or blueprints. A straight list of what the Early Access build adds, and what it does not.
Was this helpful?
Thanks for the feedback!