Skip to content
Find The Needle
Powered by Pagefind
Find The Needle guides

Find The Needle Depot and Depot Drone guide

How the Find The Needle Depot stores parts, what KEEP UP TO and Shelf Limits do, and how Depot Drones carry 3, 6 or 12 loads to the lorry.

Practical guide

Costs, drone capacities and Depot behaviour follow patches V13 to V16.4 (November 2026). Depot range and drone flight distance are not published.

11/11/2026 Last updated: 11/16/2026 6 min read
Factory floor with storage and machines in Find The Needle
The Depot is a shelf with a job: feeding the truck. Image © Needless Games. Image source

FAQ

How much does a Depot cost?
The first is free with the Panel Press. Later ones cost money only since V14.1 — $750, $1,130, $1,690 and up — with no parts required.
How many loads does a Depot Drone carry?
Three on Mk I, six on Mk II and twelve on Mk III on V15.4. The first drone is free when the tutorial reaches the Straw Panels order.
Why is my Depot dropping items on the floor?
A Depot with no belt after it drops what it cannot hold, which is how any belt end behaves. Add an outfeed belt or raise the KEEP UP TO limit for that item.

What does a Depot actually do?

It stores parts, keeps them out of the way of your production belts, and gives the delivery truck a place to collect from. Each Depot has its own inventory list and its own KEEP UP TO slider per item, so one Depot beside the stand can hold ten of something while another holds a hundred.

The Depot Drone is the second half: it flies what the current order needs straight to the lorry, which is the difference between a factory that serves two customers and one that keeps stopping to carry boxes.

When should I build one?

As soon as the Panel Press arrives, because the first Depot is free with it. After that, Depots cost money only — V14.1 removed the parts bill — at $750, $1,130, $1,690 and up, and you can build them in any stage.

Three signs you need another one:

  1. The truck is waiting while your belt is full of stock the order does not want.
  2. You are hand-carrying panels or rods across the yard.
  3. One Depot’s KEEP UP TO limits are fighting each other — you want ten of one item near the press and a hundred of another near the lorry.

How do I set KEEP UP TO?

Open the Depot, pick the item, and set how many it should keep. The slider has two behaviours worth knowing:

  • It is per Depot and per item. Each Depot keeps its own list, so limits do not have to agree.
  • Over the limit, the Depot stops accepting and pushes back. With a belt after it, the surplus moves on; without one, it drops what it cannot hold. It no longer sells the overflow, which was fixed in V13.

Two utility cards make this easier. Shelf Limits ($600) sets per-item caps on the Depot, and Carry More adds two levels so your arms hold up to 7 items when you empty a shelf by hand.

What can I do with the stock by hand?

Control What it does When to use it
TAKE ONE Takes a single item Grabbing one rod to finish a building
TAKE MAX Takes as many as your carry limit allows Clearing a shelf into a blueprint build
EMPTY OUT Sends one kind of item back onto the belt Flushing stock that is blocking an order item
Empty whole Depot Sends everything back out Rebuilding a Depot’s purpose after a stage change

The V15.4 fixes matter here: rods, gear sets and sugar sacks out of a Depot no longer sell for $0, fuel discs keep their Brick Quality, and bales out of a Depot burn again without you touching them, even after a Hay Silo. If you are on an older build, that is why Depot output looked broken.

How do the drones fit in?

Model Loads per trip Cost
Depot Drone Mk I 3 First free at the Straw Panels order; then $600 and four straw panels
Depot Drone Mk II 6 Opens with The Garden Centre
Depot Drone Mk III 12 Opens with The Paper Merchant

The paid drone needs no wire or cores, and the card lists Faster Rotors as an upgrade if the flight is the slow part. A drone can be placed with belts running under its rotors, and V15.4 fixed the case where it stopped three loads short because loose bales were lying by the truck.

V16.4 changed how they deliver. A Mk I always unloads at the doorway, while Mk II and Mk III under an open roof fly over the wall and drop stock straight into the lorry — so the bigger models no longer queue at the same gap. Drones also finish the order lines they can complete first, which stops a nearly-finished order from waiting behind one missing item.

Three panel changes came with it:

  • A drone button on each depot item. Turn it red and the drones leave that item in the Depot, which is the direct way to reserve stock for a later stage.
  • A rebuilt side card with keep-or-pass and drones-take-or-leave buttons. KEEP UP TO shows a lock icon until you buy the Shelf Limits tech card.
  • A warning when you place a drone that would mostly wait at the door, plus a clearer over-crowding sign on the Depot itself.

The honest ranking: a Mk I is worth using (the changelog says so explicitly), and the upgrade is about how often you want to look at the truck rather than whether the system works — though on a walled yard the Mk II’s over-the-wall delivery is a real gain rather than a convenience.

How do I wire a Depot into the line?

  1. Put the Depot between the last packaging machine and the truck, not between the pile and the machines.
  2. Keep the scan gate upstream. A Depot full of packaged goods is another place a needle can wait (scanner routing).
  3. Give it an outfeed belt if you want overflow to keep moving instead of landing on the floor.
  4. Set KEEP UP TO to the order’s size, not to “as much as possible” — a Depot stuffed with last stage’s product is a blocked Depot.
  5. Leave the drone a clear approach. The tutorial’s own tip is that the Depot Drone hint waits until a Depot holds something; if nothing moves, check stock before you check the drone.

The order that the stock is for is on delivery orders, the parts themselves come from the Fabricator and Assembler, and the ingots behind them are on scrap metal and the Smelter.

What goes wrong most often?

Symptom Cause Fix
Items on the floor beside a Depot No outfeed belt, limit reached Add a belt or raise the limit
Drone idles with a full Depot Order already satisfied, or no matching item Check the order sheet
KEEP UP TO keeps resetting Fixed in V15.4 when the mouse crossed the grid Update the game
Everything in the Depot is unsellable Older build’s $0 output bug Update; V15.4 fixed it
Depot list empty after placing a blueprint V15.4 fixed old blueprints laying an empty Depot Update, or re-add items by hand
Drones keep flying loads to a lorry that is already full Fixed in V16.4 Update the game
Frame rate drops on a yard covered in loose items Depot drones were the cause; fixed in V16.4 Update the game

The full build history is on patch notes, and the wider factory shape is on first factory layout.

Related Articles

Was this helpful?