Skip to content
Find The Needle
Powered by Pagefind
Find The Needle guides

Find The Needle blueprints and Dismantle Mode

Save a Find The Needle build on a Blueprint Designer pad, copy it anywhere, and use the Needle Hammer to take it down with the refund shown first.

Practical guide

Blueprint behaviour follows the launch changelog and the V14.1, V15.4 and V16.4 fixes (November 2026). Pad sizes in metres and part costs are shown in game.

11/11/2026 Last updated: 11/16/2026 5 min read
A machine line that could be copied as a blueprint in Find The Needle
Build it once, place it five times. Image © Needless Games. Image source

FAQ

When do blueprints unlock?
The Blueprint Designer opens with the Rods and Gears order on V15.4, which puts it in the second stage rather than the end of the game.
Can a blueprint include pipes and pumps?
Yes for the Borehole Pump, Cable Box, Underground Belt and Underground Pipe, plus floor markings. A blueprint holding any of the first four can only be laid on the ground.
How do I remove a blueprint I placed?
Enter Dismantle Mode and hold on a piece to take just that piece. Press R to take the whole blueprint, or use the X on its tile to delete it outright. Ctrl+Z puts back the last 20 things you removed.

What is a blueprint for?

Copying a working line instead of rebuilding it. A factory game punishes repetition: the same press-and-belt arrangement appears five times as the stages grow, and hand-building the fifth copy is how a session disappears.

The Blueprint Designer opens with the Rods and Gears order, so it arrives while the first production lines are still small enough to be worth copying.

How do I record one?

  1. Place the pad. Three sizes exist; pick the smallest that fits the line you actually want to repeat, not the biggest you can afford.
  2. Build on the pad. Every piece goes down individually, with costs listed on the hologram.
  3. Save it. The pad stores the arrangement as a blueprint.
  4. Place copies anywhere. The copy goes up piece by piece, connects itself, and comes down in one go later.

The self-connecting part is the feature, not a detail: a copy that does not connect its belts is a pile of machines. Keep an eye on the first copy while it builds, because a blueprint reproduces geometry exactly — including a mistake you made in the original.

Where can a blueprint go?

Most builds can be placed anywhere flat. The exceptions are the pieces that need ground contact:

Blueprint contains Where it can be placed
Machines, belts, splitters, arms Anywhere flat
Borehole Pump Ground only
Cable Box Ground only
Underground Belt Ground only
Underground Pipe Ground only
Floor markings Anywhere; a pad over floor paint is blocked (V15.4)

Blueprint pads can also take power from the yard across the edge of the pad, so a copy does not need its own generator to start working.

How does Dismantle Mode work?

The Needle Hammer shows the refund before you swing, and it can mark up to 50 buildings at once. Since V16.4 the mode is piece-first again: aim at a piece and hold, and you take that one piece. Press R to take the whole blueprint.

The pointer tells you which one is armed before you commit, and the Ctrl+Z hint stays on screen. If you take down the wrong thing, Ctrl+Z puts back the last 20 removals, so a mis-aimed hold costs a keystroke instead of a rebuild.

You want Do this
Remove one belt Aim at that piece and hold
Remove a whole copied line Press R, then hold
Remove a placed blueprint outright Click the X on its tile; it asks first
Undo a mistake Ctrl+Z, up to 20 times back
Check what you get back Look at the refund shown before you confirm

What did the patches fix?

Blueprints shipped rough and were patched three times, with four separate fixes:

  • V14.1 reconnected belts on blueprints containing the Hay Bricketizer, Tube Launcher or Fuel Disc Press.
  • V15.4 corrected the price of a blueprint containing a Hay Bricketizer, let T Junctions in a blueprint stand side by side, made arms in a blueprint follow the same placing rules as hand-placed arms, and stopped pads being laid over floor paint.
  • V15.4 also fixed an old bug where a Depot laid from an old blueprint started with an empty list.
  • V16.4 closed the exploit where blueprints containing Depots handed out free parts — the post calls it a game-breaking bug — and stopped blueprints being laid with belts running through machines, walls, poles, the hay, you, or past the fence. Blueprint prices now quote what a copy costs today, a pad laid half over a platform or with a tile on its corner can be taken down again, and placing or moving a big blueprint hitches far less.

If a copy misbehaves on an older build, update before redesigning it.

Where do blueprints fit a growing yard?

Three uses, in order of value:

  1. Repeat a product line when a stage asks for more of the same output.
  2. Standardise a service block — a pump, a Smelter and its belts — and drop copies near each new build (water and pipes, scrap metal).
  3. Rebuild after moving the shed wall. Extend the Shed is cheap now — $200 and one straw panel for level 1 — but the wall still moves through your floor plan (tech tree).

What to keep outside the blueprint: the Depot’s stock and its KEEP UP TO limits, which belong to that Depot rather than the design (Depot and drones), and anything stage-specific that you will tear down next order (delivery orders).

What should never be copied?

A line that hides a needle. If a blueprint includes a packaging machine, it needs a scanner on its output in the copy too, or every copy leaks finds back into the pile (scanner routing). Blueprints copy geometry, not judgement.

Related Articles

Was this helpful?